Lay laminate correctly – Tips & Tricks
January 13, 2017
Today’s Click system of laminate floors makes it easy to quickly and easily create a room with the floor you want. But even this work can cost a layman more quickly than he likes. How to avoid unnecessary stress, however, we give you with these simple tips.
They need the following tools for the correct laying of their new floor: distance wedges, hammer, hammer, drawbar, cane and carpenter’s pencil, angle miter, miter saw, cutting load and best a crosscut saw or a laminate cutter. The latter can be borrowed mostly in hardware stores, so it is not necessary to buy new equipment for one-time use. Usually, so-called pays-off are also offered for rent.
In advance, however, they should leave the material to be laid in room at room temperature for 48 hours. This acclimatized the wood , which in turn prevents coding and delay. Before beginning work, check that they have all the necessary tools together! If your laminate does not have any impact sound insulation, you should definitely buy it. For floors with floor heating or floor-cold rooms, a PE film (0.2 mm thick) should also be laid in order to protect it from moisture. The floor itself should be clean, level and dry: Larger unevenness has to be improved before the start.
When laying, make sure to unroll the substrate along the direction of the laminate. In this case, the light sources in the space should be parallel to the longitudinal side of the boards. If there are several sources of light, you should now orient yourself to the greatest.
If the base for the laminate is laid, we begin with the first row. The so-called springs of the individual boards point towards the wall. Due to the distance wedges, they should be able to adhere well to the expansion joints (8 mm) and, if necessary, to fix the laminate laterally. Take care, in particular, of flawless work, an unequal first series has a direct effect on the following and favors tensions and gaps!
The subsequent rows should now be placed staggered, Leftovers with 20 to 50 cm in length should be used here. The boards are hammered carefully with hammer and wood, and each row is fixed again by wedges. If the space is too small to work with the hammer and the wood, use the pulling iron. In doing so, the larger side is attached and carefully, but with pressure worked.
Not every room is free of obstacles and should make a flush finish when laying the floor heating pipes cut the required plank only to the desired length. Then insert the recess and saw or drill accordingly. Think again here of the play of the wood, similar to the expansion joint!
Wallpapering made easy – the basic equipment
January 13, 2017
To be able to print at home, you need more than just the selected wallpaper rolls. Here, it is advisable to get the appropriate material, for example in the construction market, because the makeshift tools with household appliances can quickly get tired. Some hardware stores as well as specialist retailers also offer the possibility to borrow the appropriate handicrafts for a fee.
The 1 x 1 of the basic equipment
A trestle table is to be replaced by a correspondingly large dining room table maybe, but the benefits of the paper reporting speak for themselves. A wallpaper table generally consists of a plywood plate and is collapsible, it should be so high that the home improvement can work comfortably while standing. Wallpaper tables often have a metal strip on which the wallpaper can be easily cut to the right size with a suitable cutting tool.
With a tape knife or cutters that the wallpaper rolls zuerteilen professionally and without jagged edges in tracks.
With a wallpapering brush the wallpaper paste is brushed onto the tracks. It is recommended that the paste in a plastic bucket to touch. Professionals also use so-called pasting machines , by having a wallpaper throughput, whereby the paste can be applied very uniformly to the wallcoverings.
To attach the paper when pasted strips of wallpaper on the wall or ceiling usually is a clean Tapezierbürste or a rubber roller used. They serve to provide the wallpaper without air pockets or wrinkles. Caution, do not press too hard, otherwise the surplus paste will swell on the sides and smear the wallpaper!
Furthermore, the successful wallpapering still a conductor needs. Here the use of a self-standing painter is recommended.
Stir the paste properly
Of course, the upholsterer needs sufficient square meters of exquisite wallpaper and plenty of wallpaper paste , which is suitable for wallpaper places that should be attached.
An old wooden cooking spoon or wooden stick is suitable for stirring the paste. With less muscle power it is possible to have a suitable stirrer as a drilling machine attachment. To ensure that the wallpapers also come straight to the wall, a water balance should not be missing.